Recent content by pundle

aim for a Earth loop impedance of less then 100 ohms and protect the entire installation with a 100mA RCD (preferably a type s)

If you are in doubt, refusing the circuit at 20A will ensure safe operation until you can rectify properly

Sorry Girl, didn't mean to baffle. A radial is sockets in a line, cable goes from one to the other, this is different from a ring where the cable returns to the fuse board. not sure what more to suggest, it looks like the circuit will need deeper investigation. QED

In that case I would be looking for a radial fed from a fused connection unit. check the fuses in all the fused spurs in the locality, other than that call a 'qualified' electrician.

This is not to be undertaken by an untrained DIY enthusiast (not being rude). 2.5mm cable is rated at 27Amps so if served by a 32Amp MCB or 30 Amp rewirable there needs to be two 2.5mm cables feeding the circuit. From what you say, this needs professional investigation. There may be more...

Hi girl "I unplugged it and changed the fuse and put the switch back up in the box but it wouldn't go up." By this do you mean the grey switch in the centre of the board, if so then you might need to push it all the way down before you push it up. good luck.

Hi we have the same problem and I have just found this website The price is about £50 http://www.heatandplumb.com/acatalog/Flushpanel_Plastic_Cistern_Low_Level.html