Thanks everyone for the quick response (you have caught me out as I am not at home at the moment). Just to answer some of your questions ...
1. There are 2 cable, 6 wires (3 pairs). Will one be a spur from the kitchen and the other feeding another socket in the Conservatory?
2. There is nothing...
Many posts already on Live Earth Reverse but couldn't find one for my situation.
I have a double socket in our conservatory. One of the sockets works no problem but the other has been working intermittently .. maybe doesn't work one out every 20 switches on. Checked the wires all looks fine...
Hello everyone, just to let you know I went ahead with the
Aurora EFD-Pro Insulation Coverable Downlights GU10's. Easy to install and fit the bill for safety. I managed to inspect the roof space and the rockwool was more than sufficent. The cables I managed to run inside the roff space from...
Something like this sounds like a solution ... "Insulation Coverable Downlight". Does anyone have any experience of these? Thanks
https://www.downlightsdirect.co.uk/aurora-insulation-coverable-new.html#description
Thanks for all the replies folks, sorry I was away yesterday and never got a chance to respond. Aptsys I have no idea if there is any
membrane or vapour barrier in place as I haven't been able to access the roof space but see that you have already confirmed that the proposed lights are...
Hello,
this has probably been asked/discussed already but here goes ...
I have an inaccessible roof space above my kitchen where I want to fit Fire Rated LED downlights in the ceiling probably similar to this...
Please note I made a mistake in my set up, the heating is controlled by a Myson MPE222 two way valve (doh!)
I haven't had a chance to check with a multimeter yet but I did take the Actuator/Head off the two way valve and the spindle is OK.
When the hating remains on the "Operating" light...
Thank you for the suggestion, I'll see if I can borrow a multimeter and check if there are any online guides for what I should be checking.
I also read that something may be sticking and I have moved the lever back and forth a few times and so far so good (has stopped calling for heat).
For some reason my Central Heating boiler is firing up and heating radiators when the Thermostat is not calling for heat.
My set up is as follows:-
Boiler: Potterton Suprima 60L
Programmer: Myson MEP 2 … heating set to “On” constantly, water set to “auto” coming on in the morning and then...
Thank you everyone for the quick response.
Last year I painted almost my whole house's woodwork top to bottom (3 storey house) using a water based Crown Satin as I was cheesed off glossing frequently due to yellowing problems. This is by far the worst paint I have ever used .. dull finish...
Just an update ... restricting the flow in the hallway radiator and opening the TRVs and Lockshields in the bedrooms is definitely improving the situation but worried that opening the lockshields in the bedrooms will be having an adverse effect on the balance of all the radiators.
I haven't...