Recent content by Rabk

Yes, I was going to remove the pop rivets and take of the aluminium slides and reattach them with self tappers if I can to try and make it easier. Once the new window arrives I will get on with the job, hopefully with not to many problems as there are more to measured up and purchased and...

Yes C R Smith is quite big in Scotland but they don't come to the Islands anymore. Trying to get someone to come and replace the windows is costing an arm and a leg, very expensive. I can get the replacement glass from CR Smith for around £80 delivered. You can add another 4/500 pounds at least...

I was going to drill out the pop rivets in the upvc window frame side rails to release the whole unit and work with it at ground level. I no what you are saying about trying to replace the glass with the frame in situ. Ouch, would be an accident waiting to happen. Thank you for your feed back

Hi Crank 39, Thank you for the prompt reply. Please see attached files. Underneath there are 2 small screws. I am thinking I would remove these, top and bottom, to split the casing!!!!!

Hi, Any help would be appreciated. I am wanting to replace a double glazed unit in my CR Smith upvc window. The problem I have is there is no bead holding the unit in place either on the inside or the outside. I think the sealing rubber is the rap around type. Is there anyway of relacing the...