We have a Veritas R8 (or may be R8+) system with a Remote keypad. we have the detectors in about 6 zones and the system is connected to the outside box. A few weeks ago there was a power outage in our area and i opened the front door ,the alarm went off.After the power came back the detector in...
Is it possible for you get me some images of what actuator head looks like.? Also i have isolated the problem as only when there is a requirement for HW the CH comes whether it is required or not.
Ask for CH only - nothing happens
Ask for HW only - Boiler fires and radiators also get heated...
Seco
Sorry i didnt check the reply while the problem was happening... I will try switching off HW when the next time the boiler fires up without CH on and the radiators get hot.
Also the stat is not turned down.
Mandate
Thanks for your clear explanation.I think according to your...
ok i will try that.. but the power switch in the airing cupboard has never been on and at this moment while i am writing this the boiler is running and the radiators are getting heated up even though the CH is at the "off" position in the timer, the HW is on "24 hrs" mode in the programmer.
yes but the lever doesnot seem to have any tension and it has 2 positions "MAN" and "OPEN". but it moves freely between the two without making any changes in the valve. I cant hear water flow when i move the lever.
When we switch on the central heating the boiler doesnot fire up immediately and the radiators are not getting any heat. But we have hot water throughout the day.If we leave the CH on all thru the day it comes up randomly for an hour for about 3 times in 24 hours. Not sure what the problem...