Recent content by ranger4

Fitted new pressure switch today and cleared fault memory from eprom and fault is still there, royal pain in the arse, Tried manualy filling machine from front pannel and it works fine so i believe the fault could now be with actual low water pressure from external well pump feeding machine...

1 red and 3 green was displayed on start/pause button in diagnostic mode not sure what code this displays as i cannot find fault code with light sequence, guess i will have to order pressure switch to find out, Thanks for info.

Inlet Valve & solenoids have been replaced, I think faulty pressure switch might be culprit, I cheaked pressure switch link pipe and no blockage, Fault occurs about 1 minute when machine starts to fill then stops with red start/pause button flashing.

Water supply pressure to new Inlet valve seems ok however when machine is filling it does seems to only trickle into machine which is when the fault with red light seems to mostly occur however when machine is rinsing the machine fills a lot quicker, Tried removing o ring (Not water filter)...

Grantuspeace Thanks for reply, The pr number is 914206107(00) ser number is 72700027.

Hello Captaincaveman1, The start/paused button led displayed 1 red and 3 green flashes after following your procedure thanks.

Hello, I have a Zanussi zwf10070w washing machine which will only start program for few mins then stops with red light flashing so i replaced the Inlet solenoid valve and replaced the main ECB pannel and the fault is still there? anyone any ideas what the fault could be, the door lock seems ok...