Thanks for the quick response.
I assume you couldn’t use the same PIR to wake up from “night time mode settings” vs when you are walking in from outside? Or would that be the same setting for both?
Hi all
I have a bit of a random question...
Instead of using a door contact on the front door to initiate the entry/exit timer delay... is it possible to use a PIR to do the same thing?
I appreciate this is not ideal...so I am just wondering whether this is something anyone has ever done...
I’ve done it! And it works! Thank you all so much!
The bell was deffo the hardest part - do I have to change any settings once it’s all learnt etc? Signal is excellent so no issues there either!
Got it. Thanks. Will give it a go. In terms of ordering
1. Drill holes
2. Insert PCB module
3. Put in smallest screw to secure
4. Put in battery
5. Put in second smallest screw to secure
6. Learn the system with the bell box secure outside? Or do I do this before I secure it?
7. Put on cover...
Hi
Hopefully the final stupid question
please see image below - I haven’t drilled any holes yet or put the battery in to the main board - but is this how it should look?
should the main board be screwed in somehow? And is it aligned correctly?
as per the pics I had some screws in the back -...
Okay will try again. Thank you.
The last thing I’ve got left to do is the delta box. God that doesn’t look easy at all! Has anyone got any videos so that the instructions on the leaflet make a bit more sense?!
Perfect. Thank you all. Appreciated.
Although just one final question - on my hallway sensor when I come down the stairs from night mode - it didn’t work on 09 setting it only worked on 08 - is that right? Ie the countdown didn’t happen on 09 just 08
Ah thanks I have a better understanding now - didn't realise I could still change some of the individual settings. I will go with the 2000 setting as suggested and make the required tweaks.
I think below are the key changes I need to make from 2000 to 2020 - can you please confirm?
Pre-Alarm...