Recent content by Raycub

Thanks Sleepyhead the dishwasher is now working ok. Your help has been very helpful and much appreciated! :D, I hope I can be of help to you someday!

Hi Sleepy head. Found the right sensor now it is white, has 2 blue wires and situated exactly as you described, it is a bayonet fitting. checked the cables between the sensor and the pcb(marked NTC). they are ok. Checked across the sensor and it is open circuit. The numbers are Service...

Thanks Sleepy Head I have now removed the NTC sensor from the bottm left front of the dishwasher. it is approx 30mm * 25mm with a green glass tube and 2 connections. the sensor has a part no of 61229 04. The sensor is open circuit but also there is no fault showing up on the display.

Thanks sleepyhead shall go and have a look now, If i can get to it builders are in.

I have checked the element, seems to be alright. Has any body had a problem with the controller or the feeler sensor. The machine goes through its cycle. The controller has whirlpool on it and is made by flexitronic part no UCB- 1CFD-P5-A2-DELAY. I THINK IT MAY BE THE FEELER BUT DONT KNOW HOW TO...