Hi,
Can someone point me in the right direction of how to secure and seal a inset sink (B&Q Equinox).
http://www.screwfix.com/p/astracast-equinox-kitchen-sink-ceramic-1-bowl-980-x-520mm/38094
I have oiled the worktop over the past week and sealed the edges around the sink with...
Thanks for all of the replies.
I think I will replace the wire to be on the safe side.
Who knows in a couple of years I am sure the misses will want to change to cooker again. :shock:
Sorry I should of said the cooker has its own MCB, on a dual RCD CU. There are two other MCB's on with the cooker for the downstairs lights and the kitchen ring.
I was making short assumptions about the cookers needing 6.5mm as I know that cookers with 10kw+ of power will need 10mm.
But...
Hi
I have recently started to renovate the kitchen and have a new range cooker. The cable that supplied the old cooker is a 2.5mm^2 which I assume to be 30A. I know that cookers should have a 6mm^2 cable. However after speaking to hotpoint they said maximum load would be 22.3A, from this it...