Recent content by Richard10002

Hi, I want to make a waterproof bond between a piece of 4 x 2 and an asphalt floor. A couple of the adhesive tubes I've picked up say not to use on asphalt. Any suggestions as to what to use? I've got epoxy resin available, and Evostik Wet Grab, but could easily buy something else...

Thanks for that - I am hoping that the wood will be protected from the water by either the bonding, or the fibreglass, or whatever is suggested.

I have a semi basement flat where water forces its' way in between the floor and wall in the rear external corner when we have heavy rain and the water table rises. I have installed a sump with pump about 3 feet from the external wall, (outside the property), which seems to do most of the...

Spoke to the engineer and the quote is £200 to supply and fit the PCB.... says he is 99% certain it's the PCB, but the fan sounds noisy, so that could be next to go, and so on. I've taken the plunge and he's going to fit a Worcester Junior 24i for £1400 - small 1 bed flat. Thanks for the...

I think that's the way I'm leaning.... having searched the net there seem to be 2 PCB's which probably cost about £200 or so. Thanks for the input. Richard

I will when I can speak with him. I'm getting my feedback via my letting agent who merely gave me his suggestion and quote. In the meantime, having had several misdiagnoses on various boilers from various engineers, it's always handy to have some second opinions from people who dont have a...

Worcester 350 Combi: The symptom is fairly simple: as soon as heat is demanded by either the heating system, or the hot water system, the boiler fires up, but shuts down within a second or so. Without resetting anything, trying again with either the heating system or hot water results...