you guys are masters.
This morning at 6:30 the CH system sounded like a person with a serious stomach problem. Gurgling and air from all sides.
All rads and HW fine.
Special thanks to Kev
Rich
Ive run the pump at full tilt for an hour and a half switching off the radiators as they got hot.
However I think there is somthing wrong with the circulation - when I switched the radiators back on they took 5minutes to become luke warm.
Could there be sludge in the pipes blocking the...
the pump is running, vibrating and making a noise
the feed to the pump is very hot, the feed away from the pump it quite hot too.
the pump is making a slight noise like a mains drill being pushed repetivitly. Could the impellor be disconnected? what does that sound like and what are the...
nicon too! on valentines night. You guys are dedicated.
I just used the Fernox restorer to descale and nuke the sludge.
When I flushed today the water was very yellow - indicating that the restorer had been working well... (i think)
Wow that was quick Kev - are you jacked into this site 24x7?
System is a Baxi Bermuda
HW is gravity and is fine
CH is pumped on the hot side
no sign of a electric valve (no wires going under the floor)
Hi,
Last week I treated my noisy CH system with Fernox - it worked great, all the noises have gone. However, I flushed out the cleaner and put in the protector today. Now only one radiator works!
I have bled the pump a number of times - very little air comes out, if it is even air and...
Hi
Is it possible to place a pump on the existing pipes feeding the bath or would I need seperate pipes from the tank? What factors would effect it?
I asked a plumber when he was round servicing the boiler, who said I would need seperate feeds from both tanks. He didn't look at the...