Visited the church again today and all three of those capacitors I fitted have failed. Cheap Amazon rubbish. I'll just leave them with the lag tube working rather than bypass the cap.
Hi,
Just resurrecting my thread from last March before lockdown. I was finally able to go into the church today and fix those faulty thorn 6ft lead lag fittings with new 5uf capacitors from amazon.
Thanks again for the help.
Rich
Hello,
My 14 year old ZWX1605 may need a new belt but I'm struggling to identify how to gain access.
You can take the top off and there is a small access point underneath but the back doesnt come off. Given that these new belts are a tight fit it sounds like an almost impossible job. I found a...
Can you still buy oval shaped lamp holders?
There are 2 fixtures there with bad connections, one has a noticeable burn mark if you take the tube out. I just made an error and bought the wrong bulbholder without checking. Lesson learned.
Heres one of the battens with a dead cap. The tube that's on only works if you jiggle it. I genuinely thought these were t12 battens and got hold of some t12 bulb holders but they are too big. Cost more in delivery charges so no point sending them back.
Glow bottle starters. I changed about 7 that didnt work, most of them the wrong type for a 6ft like the one shown, although that one still works. I think people see 80w and think it'll work for a 70w which it does for a short time and then seizes.
Yeah I saw the word vivatronic and wondered why...
I've had a look inside and it is a lead lag circuit. I didnt bypass the capacitor but I'll order one and see if it does the trick. The battens aren't quite as old as I thought, ie they are 2x70w t8 thorn emi.
Thanks for your help everyone.