Recent content by Rjs1963

Thankyou everyone for your help and comments. I will get in touch with the company and ask them to sort out issues.

I have also noticed the sealant does not go all the way round and the flue collar is not flush to the wall I can feel a slight amount of air entering at base of flue

You guess correct. The flue collar is also unable to sit flush against the wall at the bottom, as the top back of the boiler is in the way. There is a slight feel of air entering where the bottom of flue appears not to be sealed. The wiring also exits the boiler at the side rather than...

Hi Please can someone advise if the EPH boiler control is correctly installed. The control is wedged against a hot water pipe (there is a cooling vent on the wedged side) itis very loose in its fixing moving when you touch it and there are gaps around the edge. The water feed for topping up...

Thanks. I’ve emailed Gas-Safe with images and a request for advice.

My main concern is that I own the flat flat that she lives in, I am therefore legally her landlord and have since ownership had a reputable gas safe engineer annually service the boiler, carry out a gas safety check and issue a landlords certificate. Now I have to approach the engineer to...

Thankyou!

Thanks for your swift reply. I’ve turned off. It’s my 81 year old mum’s house so I’ll need to get some oil filled rads in to keep her toasty.

Hi, hopefully someone can give me some advice. A piece of silicon has fallen from top of my Glow Worm 38cxi combi boiler and looking online this appears to have covered the flu test point. I have posted some images below. Is it safe to continue use of boiler? The boiler was serviced in...