Thank you
It stays internal once set whilst I am inside and moving infront of sensors but when set and entry/exit is triggered it does go off externally after 30 seconds
Thanks again
Hi
Just to revisit this seems issue is not fully resolved. I can now set alarm perfectly normally but when the alarm is triggered it goes off ONLY internally. Nothing can be heard from outside
Any ideas? Assume it is linked to original power cut detailed in original post of thread
Thanks
Ok looks like you were right and they are unused zones. When i omit them and put alarm on and trigger it in different rooms the zones are 1 2 and 3. So it looks like I can now set the alarm at night at least
Any idea how I get the panel to realise they are unused zones as default so ibdont have...
4,5 and 6 i assume are 2 living rooms and upstairs. They are the only sensors I have in the house
I have posted 3 pictures
One is the keypad in normal state with 2 green lights one top and one at bottom
The other has 1 red light that flashes between numbers 4 5 and 6 for 15 seconds once you...
Hi Thanks for the reply
I removed the new battery and turned mains off for 1 hour before putting battery back in and turning mains back on
They are infra red sensors in the corner of rooms and the light still comes on if you walk past it
I have attached a pic just incase I have got it confused.
Hi all
Last month my postcode suffered a power cut and my alarm went off. I could not silence it for about 20 mins until Google search led to me inputting 1234 as the default code. This worked
Since then however I cannot set the alarm to work. It just would set the alarm going off everytime I...