Hi all,
Built a conservatory last year & already have a towel type radiator to go in there, but need some advice on how to plumb it in. I suspect it is like this:
There is obviously a wall between the two I will need to drill through & a height difference to take into account but I can...
Ours dont have a spring that hold the lamp in place, they have a metal insert, same as here:
http://www.cef.co.uk/catalogue/products/644359-gu10-230v-aluminium-fire-rated-fixed-downlight-satin-nickel?q=gu10
No idea to be honest, in the office at the mo, but when I looked this morning I couldn't really see any names, all I know is they came from City Electrical Factors.
Thek look like these, but longer, or maybe it's just a bad pic...
So I dropped one out of the ceiling this morning & there doesn’t appear to be anything special about them at all. The outer case they sit in is a fairly thick metal unit presumably there to stop heat transference.
I reckon if I disconnect them so the basket & GU10 mount is free I can probably...
That would make sense to be honest as my best mate did all the electrics in the place & used City Electrical Factors for everything we needed, may have to pop along to them & buy a job lot!
Hi all,
So when we built our house we had to have a certain amount that were low energy but over time as these have blown & i've replaced like for like & they were available cheap at Asda but alas no more.
If I can find them for sale now they seem to be expensive, so is there an alternative...
Lol, yeah it does look like that doesnt it!!
No I ripped up the decking around it, put foundations in & since we did the brickwork i've then put the decking back down. When we built the house we put the decking in & it's all tied into the house & inside the conservatory it seemed silly to rip...
Hi all,
I did post this elsewhere on this site but maybe here is a better place.
I’m building a lean to conservatory that is 5330mm wide x 2710mm deep & to date I’ve done the foundations, brickwork, all windows etc & now need to make it watertight with a roof.
I have all of the wood to create...
Hi all,
First post so go easy on me!!
I’m building a lean to conservatory that is 5330mm wide x 2710mm deep & to date I’ve done the foundations, brickwork, all windows etc & now need to make it watertight with a roof.
I have all of the wood to create the rafters & hopefully this is where you...