Recent content by Saints76

D hailsham Thats what I have done, a little at a time and to to get all rads to be near the same heat i have ended up with what I have , but they still go cold after

Posted: Thu Jan 30, 2014 4:22 pm I came across this type of problem once - It turned out to be the motorised valve needed replacement (complete). It was throttling circulation All upstairs rads were hot, downstairs were luke warm or no real heat at all. Sealed System with microbore to...

The two rads that are cold have all ways been cold, this is on going issue...

No the pipe work was already there and I just extended the pipe work on one side

Hello Yes I have taken out the screw in the midldle and the pump is turning, also I forgot to mention that after balancing the system four rads downstairs are all warm then after a while two rads go cold, but they are not each other!!!! The system has been added to before I brought this...

Hello I know how to balance a system, Done this many times before :) All the rads get hot after i have done that then after a while they go cold. all the up stairs rads are on 3rd of a turn back from closed (not thermostats valves) and down stairs are on all nearly open full apart from...

don't know if this helps but the whole system is in 8mm micro bore :?

Hi thanks for the quick reply's. The feed came from the old rad that was far to small for the room. I have bleed the pump no air comes out but when you turn it off you can hear a bubbling sound ??? I now this is air but how do i get it out.

Hello I was wondering if anyone has some advise for me to resolve this issue I have with my heating system. I have put a new radiator in my conservatory, refilled the system, bleed all rads and balanced the system. It worked for a while now the heating is not working as it should, the...