Recent content by SarahSmithson

Hello again. I have reconnected the wires today. Red in C; Black and Red with Grey sleeve together in L1 , but only one light still works, same one as yesterday. I do not understand it... the other light obliviously is in working order since it is not the one that stopped working...

Thank you all very much for helping me, i really appreciate it.

And i now see what you mean about the red wire which snapped in half. Although, all double dimmer switches which i've seen in BandQ were 250W+250W, which is exactly what i had before, and it stopped working. i don't mind if both lights work from the same switch 400W,as long as they work ;-)

Dimmer wattage is 400 W which should be sufficient for both lights, i think?

Have you got a replacment single dimmer or a double dimmer??? I now have a single dimmer but 2way i.e on the back there are C, L1 and L2. [/i]Do you want you single dimmer to operate both lights? I though i did not have a choice as the red wire snapped thus leaving me one wire...

Thank you very much for your post. (Quote: Last week one of the lights stopped working. Changing light bulbs did not help. I though it must be the switch.) What voltage are they? Each one was 40-240W (double dimmer) I think it got overloaded. There are three light bulbs in each...

I have read multiple Q&A on this topic but nothing seem to help. In my kitchen I have two separate light fittings which used to operate from a double dimmer switch. The metal switch housing box fitted in the wall has 4 wires (1 with yellow/green stripes, 1 x black; 1 x red in a grey...