Hi There
I have a bt socket that was knocked out and now i am unable to re-configure it
I have a blue, green,orange and brown cable
Could you please advise in which slots on the master socket should these cable be allocated
Regards
Savio Silva
Yeah that will be a mirror connected
The last socket to the MCU it is a 6 meter cable
another thing is that i run out for breaker on my MCU( i have only 4 breaker)
1 dedicated to the cooker
1 dedicated to the lights
1 dedicated to sockets in the house
and this spare one that i...
it is a fairly old buillding but all the chasing on the wall are already done
i am just lookin on a correct way for connecting these stuff.
anyone know a good eletrician in this area?
Any one know a eletrician in Guildford.... i wanted to change the old 4 fuse box pyro cable to a new rcb box but i could not find anyone that does this type of work + the eletrician that come here said for that tipe of work i will need a speacialist in pyro cable
help please
Hi All
I would like to thank you EFLImpudence for answering my previous question but there is another thing i would like to ask.
I am running a new ring into this outdated kitchen that had only 1 power Socket in it
I am running a 2.5mm2 cable that comes from the MCU with a 32A fuse...
Just one more thing....if the appliance(hob) output 7.5 kw, this is around 18A
will a 4mm2 cable be able to handle that? should not be better to use a 6mm2 cable for the hob and the 4mm2 cable to the oven
Hi All,
I need some help with my Kitchen
I am refub a kichen and i have made several changes
The last change i wanted to make is the old electrica lcooker unit.
This unit is connected direct from the Consumer Unit Board via a 32 amp breaker and a 4mm cable that comes underground...