Recent content by sc29

Hi Need to replace laminate flooring in our cloakroom after a water leak damaged the flooring and skirting. Just wondering if we need to get the toilet repaired and re-installed first and then lay the flooring around it. Or lay the flooring first and fit the toilet afterwards? The flooring...

Thanks for all your help

Disappointing. Looks like we're going to have to get the laminate up and start again after all.

So, I've been doing a bit more homework. Seems like Karndean Rigid can be installed over most floors. Would this be suitable do you think to go over the laminate click planks we have? Thanks again for all the replies - really appreciated.

That's interesting Dazlight. Think ours is classed as a floating floor. Does this make any difference? Sorry for all the questions, but if we were starting from scratch would the floor need screeding? I can't remember what they did when they put the uniclic stuff down. Just wondering how big a...

I don't suppose there's anything else that's similar to the wood plank effect that would go over the top?

Thanks for your help.

We currently have QuickStep UniClic laminate flooring. A water leak has damaged some of the planks and caused them to 'bubble' so we are thinking of replacing it as we can't get the same colour anymore. We've heard that LVT planks can be put straight on top of an existing floor without the...

Yes that's what he was told.

Interesting. I'll relay that on.

Well we seem to have found an engineer who knows what he his doing. He checked the flue collector and he thought it wasn't fitted properly. Anyway, after talking to Glow Worm it seems to be something in the heat exchanger blocking things up and causing the fan to struggle. He had an idea of...

It's been a bit of a saga since I last wrote. Had a couple of engineers out and had the fan replaced but to cut a long story short we've still got the same issues. However, something interesting we have noticed is water dripping out onto the worktop. It appears to be condensate leaking out the...

That's great. Might go with the Glow Worm repair option then and see where it takes me. I just thought it wasn't a very good boiler and though no one would know what to do to get rid of this annoying noise.

Installed 20/3/15. Here's a photo of the serial number if it helps.

Also, is it possible to find a list of glow worm specialists in an area? When you look at installers details it usually lists all the boiler brands.