Recent content by scooteruk

  1. S

    Vertical radiator question

    I have been digging around more and have found that it is a stratus vertical chrome radiator (1800 x 542) and was apparently sold by wickes. Now I am just hoping that someone has the fitting instructions for it to confirm which side is the inlet. Wickes don't seem to sell it anymore and we...
  2. S

    Vertical radiator question

    I have been reading couple of other forums and they suggest that inlet can be on the end opposite to the baffle side. I apologise and I am not saying in any way that you are wrong; I just want few more opinions as reversing the pipes will be a big problem for us. Regards Annie
  3. S

    Vertical radiator question

    Thanks all. Our plumbing is such that flow pipes enter radiators from the left hand side. I say this because when Central heating is turned on, the left input / pipe gets hot first. Now coming back to the new vertical radiator, the baffle is closer to the right hand end of the horizontal...
  4. S

    Vertical radiator question

    Hi there, we have just bought a vertical radiator and the there are no instructions with it. I want to ask a question about the orientation of this radiator. It is s vertical radiator with lots of vertical bars running from top to bottom and two (slightly bigger in diameter) horizontal bars (one...
  5. S

    diverter valve actuator/stepper motor not moving

    Hi, I,I am having hot water problem on C28 boiler. A new plate heat exchanger, valve and diverter motor was installed recently and the boiler was working fine. However now after few days, I am not getting hot water, it is a bit warm but the pipe going to radiators is burning hot. I guess the...
  6. S

    Heatline C28 diverter valve motor test

    Hi, I,I am having hot water problem on C28 boiler. A new plate heat exchanger, valve and diverter motor was installed recently and the boiler was working fine. However now after few days, I am not getting hot water, it is a bit warm but the pipe going to radiators is burning hot. I guess the...
  7. S

    No hot water - Heatline C28

    you only needed to switch off the main water supply to the boiler...no need to drain
  8. S

    Heatline C28 plate heat exchanger washers?

    Hi, thanks for your reply. I am sure there are no washers in the original C 28 as I opened and cleaned it once before couple of years ago. What I am really interested in is to know what type of washer I should use there, synthetic rubber, fibre or anything else. If someone can suggest the...
  9. S

    Heatline C28 plate heat exchanger washers?

    I have a heatline C28 combi boiler which had a blocked plate heat exchanger. I cleaned it quite well but my mistake is that I tapped the front face quite a few times and therefore now when I tighten it with the riveter valve, some water leaks. In the original C28 design, there are no washers...
  10. S

    Heatline C28 leak

    I have a heatline C28 combi boiler which had a blocked plate heat exchanger. I cleaned it quite well but my mistake is that I tapped the front face quite a few times and therefore now when I tighten it with the riveter valve, some water leaks. In the original C28 design, there are no washers...
  11. S

    No hot water - Heatline C28

    Hi Tony, Thanks for your quick response. Is this the secondary heat exchnage which is behind the gas valve? also can it be cleaned or will it need replacing? Thanks again Regards
  12. S

    No hot water - Heatline C28

    Glad it worked for you Scooteruk Now I need some help, my central heating is working fine but the hot water seems to oscillate between hot and cold every 30 secs. I see the burner come on and off every 30 secs so not sure if it he secondary heat exchanger or the 3 port valve? I also...
  13. S

    No hot water - Heatline C28

    I managed to fix it so I am posting some details here in case someone else finds them useful. The sensor is like a half round plastic clip which you can pull off. One removed, you will see a black plastic rod with (about size 17) nut on the left side. Undo it and you will find a small water...
  14. S

    No hot water - Heatline C28

    Thanks Dave, Is there any way to test the flow sensor? i.e. using multimeter? Or swapping it out with a resistor of some value? Also where is the filter located? Regards Nav
  15. S

    No hot water - Heatline C28

    I have a Heatline C28 combi boiler which is just about 2 years old. Everything was working fine till last night. Now there is no hot water, when you open the hot water tap, there is simply no reaction from the boiler, its almost like the boiler doesn't know if the hot water tap has been...
Back
Top