Recent content by seaboat

Thanks Mick Can you explain what you mean by "you must keep the feed and vent UNvalved"? As far as I can make out one is on the cylinder flow and one on the return. Would it work if they were left there? I will get some pictures soon and post them to give you a better idea. All the best...

any further advice etc: very welcome. cheers

Thanks for your input Plummerman. Never thought about that, do you mean that the 28mm pipe circuit will flow quicker and stop the stat before it suppose to? Where is the best place to fit a gate valve? Also is it really nessacery to redirect the 28mm cylinder return? I was looking at a...

Hi Tony Yes its a open vent system. Not sure what to do about the vent? Wayne

Hi guys I am in need of some professional advice. I have a Ideal Mexico Super 450ff floor standing boiler, this is how its configured: Looking from the front , to the left 2x 28mm pipes, the top is the flow to the cylinder, the bottom the return to the cylinder. On the left 2x22mm pipes...

thanks for the replies. if a auto bypass was fitted and it was not required, is it ok and safe? cheers

can anyone tell me exactly when you need a auto bypass. i have a ideal mexico super 450ff floorstanding boiler. cheers

hi new to all this, so bare with me. i have a gravity hw and pumped ch system working from a floor standing ideal mexico boiler. there are no motorised valves in the system. i have bought a cylinder stat a programable room stat a honeywell wiring box and the siemans programer, i have a 3...