Recent content by seamusw

Thanks for your replies people! I've attached the earth as instructed above but still nothing. The power goes to the shower unit but nothing happens to the unit. Any more advice greatly appreciated! Is it likely that the PCB has blown...or could it be something else?

Thanks for your replies! I had the red and blue wires connected as shown in the the photo originally. There was water at that point, only it was tepid at best. I then swapped over the red and blue wires, with the power off, to see if that made any difference. At the same time I also...

Hi all, long time user of all the great tips on here; this is my first thread! I've replaced the stablisier unit on out Triton T300SI shower following a leak only to discover was that the water was coming out tepid at best even though the low pressure light wasn't on. When I was finishing off...

Hi all, I've had the exact issue described in the opening post and thought I'd solved it - ordered the stabiliser valve and installed it following the steps above. The only issue was that the water was coming out tepid at best, the low pressure light wasn't on. When I was finishing off the...