Recent content by selectcase

Thanks for the replies - yes i have a cert of compliance, architects cert and the electricians cert ICM3 I cant blame the electrician as he put the wires in - it was the builder that actually fitted the lights cheers will

Thanks for the fast reply - i dont mind paying more for the bulb if it stops the place burning down - i see the good led ones are around £15 so i will give them a try

HI All I have just had a small barn conversion done - single floor by a reputable builder etc. Anyway all of the lighting is recessed fitting, halogen GU10 spotlamps with standard 50w bulbs. one in the hallway has just blown and on removing it i noticed it has burnt the wooden ceiling...

Hi I was wandering if anyone could recommend a competent roofing expert in the bridgwater/somerset area as I have a chimney that needs the flashing repaired and re-pointed and the wet timberwork checked or are there any trade acociations i need to look out for when looking for one? - I...

You hear the motor/pump running for a few seconds, then you get this noise for about 1/2 second- then it fires sorry for the poor description - I had better call out an engineer to have a look thanks will

With most forums you have to activate your registration via a link sent to the e-mail address you supplied to check you have a valid e-mail address - this then stops most spam getting through.

Hi All I have a worcester heatslave 20/25 oil fired combi boiler that was fitted 6 years ago. We have it serviced every year but reciently it has started to make a kind of Phaaaaat noise with some small vibration for about 2 seconds about 30% of the time when firing/heating the water. When we...