Recent content by Serg

Can't see you area options, hope auto arm areas set to B 60 min auto arm delay timer on entry/exit zone starts when zone is closed/secured Never did have an area auto armed with open zone. I usually set auto arm area to instant arm, not timed

Don't buy CCA Cat5, rubbish! Only solid cooper cable

Global options - System timers - 15 AC Off delay

You need a flood detector with output relay providing Normal Close and Normal Open contacts. 100% sure it is on ebay and may be some trade. This is best way to connect it to panel.

Just to mention what Enterprise may still sell Pyronix/hikvistion brand which is different from pure Hikvision. A year ago I ordered Hik Turbo HD DVR from enterprise and received Pyronix/hikvistion DVR-104Q-K. It is doing its job fine and looks the same as Hik DVR but unfortunately Pyronix...

'ok so you did have a app screen "enter you app code" and can go to next step "enter you panel user code" where you get stuck. is it correct? The panel can accept there only Master code. Double check your enter correct code , default is 5678

Sounds like you are in panel menu through wall keypad. You also need to set up users using connect app through smartphone. Open the app, login as a Master, tap "Menu" and "Manage users" option. "Use app" slider is there

Users don't have access to the app by default. Master user is only one who can login. As a Master go to Menu and Manage users to give them right for access to the app. Hope it helps.

This model is beeping only when backup battery has low voltage

Yes, but It is backup mode and for limited time.

This is mains powered smoke detector with backup 9V battery so if mains presents the green light is on. Green light must be on all the time. Detectors may be wired up in different ways like a daisy chain from electric board or simply each one taking power from nearest light. You will need flat...

This is Aico detector and it looks isolated as no green light. When mains isolated, unplug head from the base and check if it has core(s) terminated to IC slot on the base for interconnect operation.

When you have Smartcom up and running make sure front lights Power, Cloud, WIFI or LAN are steady. Flashing light means no connection and you need to set up it as per manual.

Depends ... if you plan to use smartphone app to control you panel online this case router is required. To be able Comwifi to work online you need to set up firewall rules in the router, open port 10001 To flash the panel you need to download Texe flasing software, get flashing interface...

When you have connection to ComWifi you can link it to your router/home network. Ones it connected you only need to have your laptop connected to router. In Wintex click Edit accout and type LAN or WAN host address of ComWifi and port, usually 10001. To connect use connect via Network...