Recent content by Sherwood93

That’s amazing, thanks CBW!!

Tried this! It is literally from 10-11pm onwards until around 6-7am

Thanks for the reply, appreciate you trying to help. I believe auto operates from 1st on until 3rd off. All day, is done of the thermostat depending on when the temp drops, which is what is happening during the day I.e. if it drops below 18 it automatically kicks in, apart from at night. 24...

So 24 hours keeps the hearing on at all times going off the temperature that the boiler is set to. It will literally just stay on the whole time. ON will fire the boiler up going off the temperature of the thermostat. So if it drops below the thermostat temp it will fire up the heating

So my boiler programmer has 4 settings ON - goes off the thermostat Auto - Set Times and temperature 24 Hour - Stays On at set temp OFF I’m using ON, which connects to the wired thermostat. As mentioned, in the day it’s absolute fine, it’s just at night it won’t kick in, despite the...

Hi All, Having a couple of issues with the central heating which I want to clear up before the temperatures drop. I run the CH via a thermostat. It’s set for 18.5 degrees and in the day it runs absolutely fine, if it drops below, the flame symbol comes on on the thermostat and the boiler fires...

Yes, had a structural engineer. Perfect, thank you.

It wasn’t an extension, we just had the back wall taken out and replaced with 6m bi folds. Is it anything to worry about and is it an easy fix?

A crack has recently appeared above my bi fold doors. They were put in just over a year ago, is it anything to be worried about

No it was the filling loop that was frozen, it was the pipe that the filling loop is connected to, which then runs through to an outdoor pipe. Still can’t top up system pressure but I’m guessing that could be because there is another blockage elsewhere. The sink is in the middle of the room...

I think you’re right with the cold water supply to the cylinder, I’m tempted to try and let it thaw out because as you mentioned it could be anywhere. I’ve circled the bit I’m talking about, it’s the pipe that connects a pipe going from the wall to the area where the pressure valve is

You will see that the the L shaped pipe came off, that’s when it was thawing. So originally the pressure was fine, and then this pipe popped off. I got all of the ice out of it and have re applied it.

No the water is not flowing from the taps at all, hot or cold, apart from the kitchen sink which can generate cold only, if you turn to hot it doesn’t work. Boiler is a baxi combi. Originally it wasn’t showing an error, but then the pressure went to 0 and it started showing E119, nothing...