Recent content by simoncrc

Ok as an update to this got it working - one of the PIR sensors was causing an issue preventing the panel from fully starting up. I've now got the system up and running but have hit upon another issue that I cannot seem to get it to read any prox keyfobs to program them onto the system. I've...

Ok so having checked a few things now: It's not working with a new short cable to the panel now - same problem flashing ********** The pad does operate in test mode by pressing the enter key when powering up - LCD works fine. The main panel red led is flashing periodically a minute or so after...

Thanks for the advice I shall check what you suggested and report back on any progress. In terms of fixing the pad I simply disconnected and reconnected the lcd screen to get it working before. The reason for replacing the old panel is as I bought the property but nobody knew the code for...

Wondering if anyone can help with this issue thanks in advance for any advice you can provide! I'm currently in the process of attempting to replace an old basic screwfix alarm panel and keypad with a Honeywell Galaxy Flex 20 panel and Mk7 Keypad. I've tested the panel and keypad before...