unfortunately neither was checked. Our builder installed it. I supplied it and now realise the error of my ways. Is it easy to check and what are the differences?
Out of interest do many domestic locations have pressure of 1.5bar. I always thought we were fine here and lots of powerful flow from the taps/hosepipe etc. I have notice that it goes into low pressure as the tap is opened or loo flushed. If you leave the tap on, it recovers so it is just the...
I have recently had a new Triton T100 10.5kw installed. It works fine until someone puts on a cold tap etc and it then goes low pressure (cold) for a short while. when having a shower this is a bit annoying.
My mains pressure seems good here and I was expecting that a 10.5kw shower would work...
Many thanks....that saves me a job at the weekend. Incidentally I am reading a lot about 240v halogens having shortened lives using dimmers. I have bought a special electronic dimmer and bulbs that say they are suitable for dimming. Will they still have shortened lives??
Hi, I have just fitted 5 x 240v halogen and 9 x 12v halogen off a new MCB in the consumer unit. They are all 50W. The 12v ones are all on separte transfoirmers. This is run in 1.0mm cable and I am failrly confident this is within the loading of the cable ie 14 x 50 = 700W so about 3A. However I...