Recent content by smickers

Thanks for the quick reply, its a tray with a lip, however the plasterboard isnt resting on the lip as I previously thought, there is room to extend it with a piece of PB. I have cut a small piece of plasterboard to fill the gap, glued it in, and fitted the polyester tape as close as I could to...

I think I've messed up! Under advice I fixed the board about 10mm above the tray, just so it is resting 2mm above the frame of the shower tray. Waterpoof kit arrived today and the gap between the shower tray and the board is quite big, with the kit asking me to put the tape between the two...

Cheers guys, tried both and got a far better finish with the adhesive going on the walls.

Why is wrong to apply adhesive directly to the tile, and not the wall?

Can I fix the tiles straight onto the tanked plasterboard? Thanks for the fast reply!

Hello all, I'm totally new to this forum, and to DIY. I have a newbie question that I can't seem to find the correct answer to. I needed to retile my ensuite shower enclosure, due to a leak and on taking off the tiles near the tray, the plaster board was rotten. 4 hrs later, I now...