Right new problem. I rechecked the diaphgram, just incase, and it was the correct way round ( this is just to stop the doubt in my mind). But now the gas chamber refuses to light but the small pilot light does ignite but nothing else..... I swear i never touched anything else!!!!. any ideas?
Since replacing the diaphragm on the boiler and fixing the other faults i now seem to have a new problem. The hot water coming from the bathroom sink is fine but the bath hot tap hot water starts out ok but as it gets hotter it slows down to a dribble then stops and is much louder than it used...
Sorry but i should of replyed!. It looks like the previous owner had been messing as i found the problem. The ignition cable running up from the switch had been cut at one point and had been resoldered badly and had come loose. I found it after taking the metal cover from the top chamber off...
I know im being a pain but i really need some help about now :oops: . I Have watched things carefully and the new diaphram pops out but doesn't seem to touch the switch, the switch works manually and you can hear the igniter sparking but no flame. Eailer the Central heating would fire up and...
I can get hot water while the heating is turned on and i can see the boiler flame get brighter when both water and heating is on it won't fire up with the hot water on its own.....
right i have replaced it but now the boiler isn't firing up for hot water. The boiler is working for the heating just not the hot water. You can hear it click but thats it.