Recent content by Snowyy

Hi Currently have paving slabs on patio, small section have 450x450 and the rest is 600 x600. Paving slabs have become tired and damaged after many years. Do jet wash every year to clean and make not slippy which I know isn’t ideal as it accelerates the wear and a few are just breaking apart now...

I unplugged all 4 cameras from splitter and just plugged in the new camera and it lit up and I heard the switch inside come on, get a Pic now so it must be psu not powerful enough to supply cameras. What size psu do I need? Annke only sell 4 way splitters so would need two from them but as I...

Did think same thing as cable outside is next to flood light cable however New cable is next to dvr as testing, so it is away from everything

3000mA on psu, can’t see any amp rating on camera only says dc12v

Bought a new Annke adl500 camera and premade cable, plugged in to test but same issue. No image or light on camera and all others flicker. Tried a different bnc port on dvr and power port on 8 way splitter but same issue. If power port that was working for one camera is not working on new camera...

Hi Looking into getting my garage door replaced, at the moment we have two tall wooden doors but we only use the one on the left-the other is secured shut. Both doors but especially the left are quite badly rotted around the windows and at the bottom. I was thinking of getting the right one...

I intend to, just can’t sure if I needed to replace the cable and route away from the flood light cable to prevent interference-as I said though I can’t recall it previously being a problem

Yes, when I connect that camera up there is still no picture on it but the other 5 start flickering

Hi I’ve got an 8 channel Annke DVR with 6 analogue dome cameras, all has been ok however one of them stopped displaying an image some time ago, tried Bnc cable in another port but still the same so assume it is the camera that is faulty. I’m looking at replacing the camera but noticed an issue...

Hi My cooker extractor motor has started either making a screeching noise on start up or humming and not running , both go away and it starts working normally after about a minute. I've took the motor off as I wasn't sure if there was a capacitor on it that was failing or if it was getting...

Yes thanks,

That sorted, it’s getting hot now thanks gazfen

Hi Thanks for the reply, unfortunately not-I assumed it was a tr4 based on what I come across on screwfix as it looks the same style although doesn’t actually say tr4 on my head. The description gives it as M30 x 1.5 so I bought a Drayton head only with the same size fitting, tried it however it...

Radiator is still not getting hot, all other radiators are though? TRV pipework and valve on rhs of rad is hot to touch and even the piece on the radiator that it screws into however rest of radiator and lockshield pipework and valve is cold. I’ve undone bleed screw and warm water is coming out...

Thanks Harry and Terry, yes the valve pin was all the way out and if I pushed it in it remained in so I pulled it and it came out completely, sprayed some wd40 in there and out pin back in and now it is nice and springy. Removed lock shield cap and turned clockwise to see if it was locked off...