Recent content by sonicfury

  1. S

    Replacement boiler

    I think it'll be grant. Not as much choice in Northern Ireland. I also looked at warmflow, but they don't seem to get great reviews. Also would you recommend non condensing over condensing? Is there much difference in efficiency? Thanks.
  2. S

    Replacement boiler

    I have a 26 year old external oil boiler I need to replace. It is a standard heat only setup. If I change to a condensing boiler would there be any more pipework. The current pipes are buried underground from the boiler to the house. Thanks.
  3. S

    Replacing Riello 40 g2s with Riello 40 g3

    Picture of my current boiler and pipework.
  4. S

    Replacing Riello 40 g2s with Riello 40 g3

    Hi all. Some advice please. I've had another 3.5 years out of my boiler now 26 years old. But I think it's time to have it replaced. It's starting to leak water. Any advice on a suitable replacement. Would like an external, as current boiler house is on its last legs. Condenser or non. Thanks in...
  5. S

    HELP - Oil Boiler Problem

    I forgot to say this has been connected for 25 years.
  6. S

    HELP - Oil Boiler Problem

    I know this thread is 11 years old, but I have a similar problem. Do I just need to replace the auto air vent or should I also replace the t piece with an elbow. Thanks .
  7. S

    Replacing Riello 40 g2s with Riello 40 g3

    Thanks for all the replies. I have had someone look at my boiler and they have replaced the bearings in the motor also new pump coupling and nozzle. The boiler is now running great the radiators and hot water are getting to temp much quicker. The boiler is now cycling on and off I think as it...
  8. S

    Replacing Riello 40 g2s with Riello 40 g3

    Hi ive attached a picture of boiler thanks for replying
  9. S

    Replacing Riello 40 g2s with Riello 40 g3

    Hi Bit of advice needed. I have a riello g2s burner 22 years old that had been noisy and then stopped working, motor not turning just buzzing sound then lockout. I removed the fan cover and was able to free up the motor. So now working again but still a bit noisy. I can get a new R40 G3 for...
Back
Top