I've just putting the waste in place ready for the basin etc. The shower and toilet are on one side of the bathroom and the vertical stack runs...
It's difficult to buy locally and I can't view much at the moment locally. I'll take a look at the Simpson ones, thank you for that. What do you...
I'm just about to put in a new shower tray and enclosure. There is a vast price difference between different models but it isn't over clear what...
I would if I could but there are so many pipes in that area that I can't find a reasonable way through. The place I suggested is the only place I...
Also how about the attached as a possible work around? (Please note I've altered the top of the before pipe layout as I found it to be slightly...
I've had another look today and it will be very difficult to correctly come off the end, there just isn't space. You say it might be difficult to...
I could do that which would probably stop it melting off anyway as I install the 22mm T. I was half considering just using a plastic tee to stop...
Well that makes it a bit trickier! The end of the 22mm flow pipe is currently a straight reducer to 15mm which then bends off to feed the rad....
After much floorboard pulling, I now think I've pretty much mapped out the current heating circuit. I've attached an image showing the before...
I think I can just about get 2 notched in at about 85cm from the wall which is right on the limit for notching distance. 25mm depth allowed for...
The main reason being that I have 3 lengths of 22m copper :)
Thanks for that, if I'm understanding it correctly then yes you are right that the existing ones don't follow that. Is the span the complete...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice
