Recent content by soul2soul

Thanks was not aware of this potential issue

Thanks - is there a better option than the ones that I am considering?

Hi All, I am looking at getting a Texecom Premier Elite 48 for my home & wanted some independent advice on two areas. Outside of the extra cost is there a downside to using Dual Tech motion sensors rather than Quad Pir inside my home? I have already decided to go Dual Tech for the garage. I...

Tony came round & quickly found the fault which I believe was open valves of the expansion tank allowing air into the system.

Did not think of that! Will defo send them all back. Have spoken to Stelrad & they will refund the cost of the replacements if the fault is due to the manufacture of the rads

[/url] Thanks - still have the Stelrad reciepts & the warranty is 10 years. However i have a feeling this will come under a system fault rather than a rad fault. But will try either way.

Hi all, In the space of about 4 weeks 3 radiators in my system have developed pin-hole leaks. I believe that there is corrosion in my system & want to get an idea of what the problem could be. I have an unvented hot water tank & I believe that the heating system is pressurised...

Been getting some work done on my kitchen & my builder has blocked up an old air vent as a unit is now going to go there. I have space to put a new vent elsewhere if needed. Just wanted to know what the pro's & cons are of doing or not doing this?

ok thanks - damp cloth it is then :D

Has anyone used a domestic one of these? Got some building work going on at home & the builders are now taking a break for Xmas & I wanted to use one of these to help take some of the remaining dust out of the air. Thanks

ok thanks - will get rid of the dimmers. I assume that this is a common problem with dimmers then?

Got some new bulbs over the weekend & put them in next to old ones & cannot tell the difference. Also found one of the boxes for the lights & they are 240v GU10's.

Which is best to use as a base for Laminate flooring. Plan is to cover the floorboards with 3mm of one of the above then use 3.6mm duratex underlay with the laminate going on top of that? It's for the first floor rooms in a house. Thanks in Advance

Thanks will get a new bulb tonight to compare & report back. Love the effect of them apart from them not being bright enough when the dimmer is turned up on full.

Hi All, I have spot lights installed throughout my house & they now seem to be giving off a yellow rather than bright white light. I have 50w bulbs in them & I am sure that they were a lot brighter when they were first installed. Any ideas as to what could cause this or common things for...