Recent content by spuddie

if fitting parts on boiler you wont get many if any heating engineers to work on the boiler in that configuration - especially with all these health & safety rules these days , believe me i work for a large company & we are not allowed to work of ladders , i would rethink you're layout , not...

wouldnt be a lot less hassle just buying a new tap ??

hi , was reading another subject on forum with same problem ,, have tested coil as soon as it locks out & resistance reading O.L ,, having switched boiler off when running & resistance reading 2.2k ,, my local supplier has one in stock so will pick it up tomorow ,, thanks for the help guys

hi , looking for a experienced oil engineer , I - embarrassingly am a gas ( no experience of oil )heating engineer but cannot find any fault finding guide regarding readings to pinpoint lockout problem ie voltages resistance etc ,, danesmoor 15/19 - does fire up - when cold runs for approx 30...

hi , how did you get on with replacing capacitor as mine doing exactly the same thing

2.5mm armoured cable as need to run from garage along side of house into conservatory

im using armoured cable

oh , one last thing - i already have the 32a mcb,s , ok to use them or should i just get 20a ? thanks

thats brilliant advice thanks - think ive got it all in my head now - takes a while lol , thanks 2 everyone for the advice , cheers

conservatory sockets - tv,sky,mobile air conditioning unit ,lamps,etc , - so thinking i might need 32a , outside sockets 2x2 doubles for garden lighting mainly - maybe 20a for that ,? i take it that mcb,s on rcd side shouldnt add up to more than 63amp rcd rating ??

not sure - maybe 32a a bit much - what do you recomend ?

hi , i have a hager consumer unit ( 100A ) , mcb,s on it are 1x32a-cooker , 40a-shower ( not used ) , 2x10a - lighting , 2x32a - sockets , 1x20a - garage sockets , & 63a rcd - hope that makes sense , there are 3 blanks for adding extra mcb,s i presume ? , i am looking to add 1x32a for new...