From experience of our multifuel stove and back boiler system. It is very hard to maintain sufficient temperature of the stove for a wet system to be effective. You become like a steam train driver constantly monitoring the stove temperature and loading with the correct fueld. As time progresses...
If I remove a radiator from the system, do I just cap the inlet and outlet pipes or do the pipes need to be joined together for the system to flow?
The system is a solid fuel backboiler with vent / expansion tank in airing cupboard for radiators.
There are 5 radiators in the system, but we are...
Perfect, this is a much better diagram than was included - just as needed. Thank you. The heater is being directly connected to the thermostat (plug removed), should be around 3.5A - 800W.
I think the thread has drifted a little. The initial issue is how to wire a manual room thermostat for a device with live, neutral and earth that is designed to be plugged in. There is no switch live like a boiler would have. The effectiveness of the thermostat is not entirely relevant as the...
I have wired digital stats for other heaters and the thermal mass seems to trigger them. I have not needed to connect an ir heater to a manual thermostat until now. The instructions say to connect neutral to 2 for less than 6 amps.
I have a Honeywell T6360 manual thermostat and a room heater with live, neutral and earth. The supply for them is a fused spur. There is no switched live like on a boiler. How would this get wired?