Recent content by squirrell

So if I fill the central heating system back up then it will all return to normal then?

I didnt think it would affect the hot water as the ch comes from the boiler and not from the cylinder

I drained the central heating as I needed to replace 2 radiators. The boiler was turned off (traditional boiler with cylinder). I left the central heating drained after replacing one radiator as I was going to replace the other radiator the following day. The boiler was put on for hot water...

I shall investigate...thanks...cant remember seeing one...need to have a closer look

the handle is free from the door and is not glued or painted to the door...its just the locking mechanism that seems to stop the handles from coming off

I want to change the handle on my bathroom door which is fitted with a bathroom lock in the form of a turning spindle that can also be unlocked from the outside if someone locks themselves in. I have undone the 4 screws on each handle but the handles still wont come off due to the locking...

its not a donut...its flat and is thesize of the cistern, with a triangular shape missing in the middle where the water goes into the pan...a donut is the wrong design and would not fit

I have just bought a trent wc which does not have a donut seal but a flat thin rubber gasket that says it needs to be glued onto the pan and the cistern. If this is the case and still leaks, how can it be repaired. I have tried doing the seal without glue, but it leaks profusely at the back and...

good job Im not touching any gas then...didnt know you could get gas in a toilet, apart from after a vindaloo!! :lol:

I need to replace the cistern lever on the toilet and have just bought a universal cistern lever but it doesnt fit through the hole in the cistern. What do I do?