Recent content by StanleyES

Reporting back as promised. I did intend to increase the pipe size to 35mm but the largest tank connectors i could get were 28mm. I thought that having 2.5m of 35mm pipe reduced to 28mm at both ends would probably lose much of the benefit of the 35mm pipe. So, i have re-piped the feed from...

OK OK, i get the picture...and Kev is right, i am the one in the firing line.javascript:emoticon(':oops:') Anyway, i think i will try the suggestions of increasing the pipe size between the cold and hot tanks and possibly the vent also. I will post again to let you know how i get on...

I think a Surrey flange will give the same problem as the S flange i have. They both have the dip tube which will hit the coil in the HWC. This is the S Flange i have... http://www.tapstore.com/acatalog/Salamander-S-Flange.html The collar below the two washers is just a male to female...

Hi, I'd really welcome advice on our shower problem. I'm reasonably competent DIY'er but i'm starting to struggle with the plumbing in our house. We have removed the airing cupboard from our upstairs bathroom to be replaced with a shower cubicle. Unfortunately, the loft has limited height so...