But you're saying I need to just join them as they're connected somewhere else - I'll give it a try tomorrow. Do I need to remove / join the cables at the old thermostat end as well ?
Ah - should I terminate both ends then ? I just put both wires in a connector block - not joined together and the other end is still connected to the thermostat in the hall as was.
Hi Ian,
Yes - I did replace with Dual Channel and it seemed to be working in so far as the Hive Thermostat would turn the Green lights on the front of the Hive controller on but the boiler would not start - no matter how high a temp I selected or did the boost option. Wiring wise I removed the...
I have a Danfoss Controller wired up like pictures below.
I installed the Hive Controller and wired it same but minus the thermostat connections on 5 and 6. All seemed to be working fine, as in the Hive hub and thermostat all talking to each other and the controller but when I either manually...