Recent content by steve1978

  1. S

    Adhesive not setting

    I have done as you have said already and stripped the lot off and started again as i suspected same as you that i did it just slightly too early in the year and the frost got to it before it had time to set so fingers crossed my doing it early this morning and the nice warm sunny day we are...
  2. S

    Adhesive not setting

    I have tiles a plywood topped wooden table outside some weeks ago and covered it with a waterproof sheet to prevent it getting wet but the adhesive is still as it was when i first did it anyone know why please.
  3. S

    needing someone to hang paper

    Thanks for the info i will go try that cheers Steve
  4. S

    needing someone to hang paper

    i will make sure i do that thanks
  5. S

    needing someone to hang paper

    Hi folks I am in need of someone to hang me 50mts of wallpaper in the BL7 (Bolton area) The paper is approx 40mts anaglypta and 10mts patterned to plasterboard walls. Happy to pay someone but it needs to be a decent job and to be honest my own papering skills just dont go anywere near...
  6. S

    Outside lights tripping rcd

    thanks for the info i will do all that and see what happens
  7. S

    Outside lights tripping rcd

    The problem is i cant see any of the cable as its all buried and i dont even know where to look as the bloke that owned the house before us is no longer with us so i cant even phone him and ask.
  8. S

    securing outward opening door ideas

    Thought i would let you folks know that we took onboard your comments and acted on some of them and so far all has been ok. We have also installed barriers so that vans cant get to the rear of the building so with a bit of luck it will make robbing the place less attractive in future
  9. S

    Outside lights tripping rcd

    Hey folks i wonder if any of you have any ideas for solving this problem. We live out on the moors and so its very dark so we have quite a few external lights all wired into a wall mounted trip switch and all has worked fine for the last 18 months but now when we go to turn on the lights the...
  10. S

    laying new drains, what to fill the trench with.

    Nothing to stop you rendering either side if you like. if your thinking along along those lines don't use plastic pipework. also whilst we are thinking rats make sure you use a black multiquick when connecting your toilet as rats will bite through any other colour as light shines through the others.
  11. S

    securing outward opening door ideas

    We are having CCTV installed next week and yes it has something very enticing inside that unfortunately due to nature of the company everyone knows about. the method of attack this time was via crowbars and by the look of the door it took them a good couple of hours to get in and thats whats so...
  12. S

    securing outward opening door ideas

    it has 3 heavy duty ball race door hinges with locked hinge bolts sothe hinge side is brill. We now have 3 locked cranked bolts on the door but pre 2nd robbers visit we had 2 bolts up and down so to speak
  13. S

    laying new drains, what to fill the trench with.

    Yep lay your plastic drains on 100mm of pea gravel then cover them with same then use the soil you dug out to backfill but remove and big rocks of bricks first. Think what they are trying to tell you is not to use plastic pipe through walls as its normal practice to use clay pipes through...
  14. S

    securing outward opening door ideas

    Hoping some of you good folks might be able to give me some good ideas on this 1. I have an outward opening door on the rear of my building and have been broken into via it for the second time this week. What i am looking for are some good ideas of how to secure it. The door is outward...
  15. S

    Halgen picture lights problem

    Its looking like i am going to have to turn the power off and have a look inside. might be a while before i can do this as some equipment that has re start problems when shut down is also run from this supply and to be honest the bloke who labeled the fuse box up must have been drunk when he did...
Back
Top