so you mean. have supply come from c.u into switch, then switch into tranny, and link all the tranny inputs together then take a switch wire from each tranny in the out put to the lights
yes steve but i didnt know where to place them. so is this correct.
consumer unit - light swithch - tranny - downlight - tranny - downlight - tranny downlight - tranny - downlight
in series
hi guys i am new to wiring downlights as i work with 240v.
but i am wiring downlights in my bedroom which require to be transformed down to 12v. there are 4 lights in total.
they are 20w bulbs., so i am told i eed a transformer for each light.
how would i go around wiring it, am i right...
I have a 32amp breaker in the house feeding a consumer unit in the garage. The consumer unit in the garage has a 6amp breaker feeding the lights and 16amp breaker feeding a radial power circuit with 6 sockets on it. Should i upgrade the breaker to 20amp or is 16 fine?.
Thanks
Sorry man.
thing is i have ran a 2.5mm, which i have a feeling is wrong. It's about a 25m run.
I will have guitar amplifiers plugged into the socket, so you reckon this will be ok?
Hi,
Just a question. Hope some you guys can help.
I have ran a cable out to my garage from my house, which will supply a 32amp ring main and a 6amp lighting circuit. How big should the MCB be in my house and how big should the cable be.
Also. Would i be ok with 7 socket outlets in...