Recent content by steviep

thanks tony i will give it a go

had same problem so changed pressure switch but did not cure problem

DIY Photo's

The one that is mounted on the side of the valve body for the diaphragm switch which is shown on the cut diagram for measuring the pressure

NO NO SEPARATE GAUGE BUT ONLY HAVE JUST SLIGHTLY OPEN THE FILL TAP AND PRESSURE SUDDENLY JUMPS. WHERE NORMALLY YOU WOULD HEAR THE SYSTEM FILL AND COME UP GRADUALLY.

keep getting F0 fault on my jaguar boiler but pressure is ok if i try to charge the system it suddenly jumps to 3-4 bar have changed pressure switch but still have same problem has anyone got any idea's.

thanks for the info my jaguar boiler has just had the same problem. :D

Have a micron glow worm boiler which stopped working fault finding chart does not match board fitted board fitted has 2 led's only. Start boiler fan starts then both grn LED's flash and fan stops and lights just continue to flash have fitted recon board at cost £60 and same problem help before...