Recent content by StingStiz

Thank you - This was driving me crazy on my Vokera 730. Dog barked every time boiler fired up in the night.....may get some sleep now.. :-)

Hi, but there was no pressure in the system (zero on front guage) when i charged it. Also if the membrane inside the EV is like an innertube, how can so much water get in if it is not punctured ?.

The expansion 'tyre' valve is just letting water out, so looks like the membrane is knackered. Is it possible to just connect a 12 litre external expansion tank to the flexible pipe that went and screwed to the original EV ?

See Fig 40 pg 26 in the manual : http://cdn0.vokera.co.uk/wp-content/uploads/2009/04/linea_installation_and_servicing_instructions.pdf

Hi, there was zero pressure in the system at the time when the EV was pumped up. I will try one more time tonight just in case but the EV valve didnt even hiss as soon as I pressed it in, just clear water dribbled out (too much for just condensation I think ?). I think maybe now with me...

Hi, thanks for the quick reply, the EV has been pressuried with a pump (1 bar) but a few days later when the valve was pressed in, just a little water dribbles out , no air and water (droplets/mist). You can get the old EV out (just 4 screws which I can see) as there is plenty room above but I...

Hi hope someone can help. The expansion vessel (EV) seems to be knackered as water comes out of the schreader valve (car tyre valve) when pressed. The pressure valve is also leaking (water out of overflow pipe outside) and small drip inside, again more signs that the pressure has increased at...