Recent content by Stumark

Hi all, I have a hotpoint dishwasher which is about 5 years old. It has recently become quite noisy. I've attached an mp3 recording of the noise. Is it obvious to anyone what the problem is? It still seems to wash dishes okay but the noise seems to be getting worse. Thanks for your help...

Hi, that worked perfectly (putting both wires together). Thank you so much for your help, saved a lot of hassle!

The noise I heard probably was a pump so that would make sense. We never quite understood the old timer - the heating and hot water 'on' lights lit up for both when on timer but to use the 'boost' or 'override' functions we just used the heating button. Would there be any risk to putting the...

Hi, I just got round to trying this. The unit powers on and it lights up to suggest that the heating is on but the boiler doesn't fire up as it would normally. It does seem to make some sort of noise when set to 'on' but definitely doesn't come on. The boiler 'on' light doesn't come onm Any...

Hi Johnmdc, Thanks very much for your help, I'll try and have a go tonight but might not have a chance until the weekend. I don't think it has ever controlled hot water so I assumed that all wires were for the heating but ill follow your advice and see how it goes Thanks again.

Hi thanks for your quick reply. I understand the need for wire between L and 1, that's shown in the manual (although not on the actual timer for some reason). If I swapped the yellow and black cables around, I'd have no cable in 2. The diagram shows a circuit from 1 to 2 or 1 to 3 depending...

Hi all, I'm hoping someone would be kind enough to help me with a wiring question. I am hoping to replace my existing analogue timer with a Drayton 7 day timer (Drayton t711r) that I recently purchased. My boiler only heats central heating (i.e. No hot water) My current timer has buttons...