Recent content by Sully114

Thanks, yes thats also a way to do it, my logic with this method was to keep the radial on the accessable panel and then have direct feed to switch from board and from swith to led downlights. So if something goes wrong it not taking out other stuff as well. Its potentially easier to split the...

If your not going to contribute to the original question then why hijack the thread? are you bored or something.

Are you still here?

Why so you can tell me that im not allowed to run a few cables? Im just trying to get an idea of cable routes so I can preplan things like celotexing. Your just here to troll, so if your not going to add anything then please go lay some cable somewhere else.

Thanks, your really helpful.

Becuase if I can do the donkey work and run a few cables which could save me a few quid I will. I wont be hiring an electrician that charges me more for asking a question either so no worries there.

Blue box is a seperate wago for feed coming off the MCB. Just to seperate everything.

Hi, just looking to get some advice on the lighting circuit for my house. Basically ive built two new bedrooms in the attic and was thinking of the best way to wire the lighting circuit for this level of the house. I will be getting a professional in of couse. But would there be an issue with...

Woohoo fixed it... the relay turned out to be fine, the trace had burnt out on the underside of the board, so re-soldered it to the relay again and now everything is working perfect...Saved myself a small fortune :)

Hmm well what I mean by "experienced" is, I repair/refurbish alot of computer parts as a side buisness, saying this I dont normally deal with these kinds of relays as part of these repair procedures. This is why I wanted a second opinion on the relay part number you see... I can understand...

Yea I understand what your saying, im skilled in such repairs and thought It would be a cheap fix. I see other people around selling these PCBs refurbished with 1 years garuntee. So this got me thinking that they are only replacing the common failure points on these boards which are these...

Hi I have been having problems with my Baxi Solo 2 PF. After investigating the problem I have found the black relay in the front right corner has burnt out. On the underside of the pcb you can see burn marks on the solder joint, trace etc.... My question is where can I get this relay? I see...