Hi All
I have a Vaillant eco tec 615 plus boiler sealed system with a tank In the airing cupboard managed by a Hive thermostat and intermittently the hot water is cold when having a shower at 8pm ish. The times to heat the water are 0600-0700 1100-1130 and 1700 -1830 and it always worked ok...
Is it reasonable to expect the joiner to measure the new worktop before they cut it or is it up to the customer to point out the new worktop is wider. ( hindsight is a wonderful thing)
Additional questions do most joiners fit the worktop and sink or just the worktop.
Thanks
I think he cut the hole for the sink and hadn’t taken into account the new one was wider than the existing and wanted some taking off the back before cutting the hole
Hi All
Ive had a new worktop and sink fitted but the worktop sticks out too far , much further than the original and the fitter said its because we have had a granite sink fitted and it needs more support. Is there any difference in fitting a granite or composite ? and any idea on the cost to...
HI All
my cistern valve is sometimes leaking into the pan, its a https://www.screwfix.com/p/viva-button-handle-dual-flush-valve/6998h
I have cleaned out the cistern so as nothing is stuck under the valve , does this mean the valve needs replacing.
Thanks
Hi All.
Happy new year.
I have a Vaillant ecotec plus 615 system boiler with tank and the hot water isn't getting hot sometimes , we notice at night when having a shower. it is set to heat water 5am-6:30 11-12 and 6pm till 7:30.
I have checked the boiler when it's heating the water and the...
Both 2 way valves was replaced last year, when you say put on permanently do you mean slide the lever and lock it in position , I will try that and a factory reset as well. I will ring Hive but all they will say is reset everything as thats what they have done all other times ive asked a question.
Hive system been working ok for a while but the last 2 days the hot water has been cold at 8pm for a shower even though the hot water schedule should have heated it up for 6pm to 7pm. Everything else seems ok. So apart from a factory reset and reprogram is there anything else I can do please.
Thanks
Hi crank39
I have place to use an allen key , photo attached , is it the screw I have too turn , is so clockwise or anti clock wise , there's 3 of these catches
Thanks
Hi All
I have 3 casement window all letting a draught in at the same place, the windows are 12 months old but cannot get the installers back. Can you advise how to adjust the window to seal the draught please. The side that is draughty isn't the one with the middle post attached.
Thanks
Found the replacements online and they are these
https://www.choicereplacementtoiletseatshop.co.uk/p/tc-bathrooms-connection-soft-close-toilet-seat-hinge-set-tcbh1
take off with a Allen key from behind , ordered some have to see if they work ok
Thanks all, it’s on the wall at the moment using the gripit fixings but any further issues I will need to cut out plasterboard and prefix using Brigadier’s method