Recent content by the_jinj

I had to set the internal timer to override. Was thinking about the voltless contacts in the wrong way, silly me. Now sorted :)

Hi I recently got a Hortsmann HRFS1 thermostat to control my Biasi boiler. The Hortsmann is setup ok and appears to be switching on and off as desired. 2 core running to boiler from OM and NO contacts of the thermostat to the boiler. According to the manual you connect to connector 1 and 3...

Cheers again! Going to give the HRFS1 a bash, cheap enough off of eBay :)

Thanks :) I was going along the lines of using a thermostat as it might save money in the long term.....never had one before, is it a worthwhile extra to have for this reason or should I just stick to the plain controller? Cheers

Hi I have a Biasi M90E 28S combi boiler which I am going to add a controller to. I was initially looking at the Draytech 111 or 711 which offer the volts free timeswitch I need, however I noticed the Horstmann HRFS1 wireless thermostat which also allows programming...

Would sealing the walls in this way cause problems with water/dampness still being present inside the brick?

Hi After investigating a damp smell from a cupboard in my converted basement I found that there was water ingress from the wall area. Further investigation shows that a small trickle of water is penetrating at a small area where the concrete floor meets the wall as shown in the attached...

Sorry, meant to say that the cam is rotated fir tightest fit. On further investigation the bottom cam isn't catching so the window seems out of square.

Anyone done this before?

Hi I have a UPVC DG window that is failing to close tight so noise can be heard when shut. I replaced the seal but still have the same problem. This is at the hadle side, if you push against the window it seals ok. Looking at the keeps the ones that are fitted now are the ones in the first...