Recent content by theb

Update - defeated on this one so ended up getting a new boiler installed.

Engineer did that when he took the cover off, said it was fine.

Both flow and return valves under the boiler open/close as normal (checked when the combi has been drained down)

Thanks for the reply - it was a new pump with the wiring already connected to the push fit terminal and inside the pump head casing. I double checked before it was fitted to make sure it matched with the existing/original pump as the 39c needs a slightly more powerful pump compared to the lower...

Any Broag experts about? I've a Remeha Avanta 39c combi and getting the E10 error when switching on the boiler. I've had a gas engineer around and looking at the manual the error code relates to; air in the system, water circulation problems or water pressure. - The pump was struggling, old...

Old thread but I had a similar problem with a Remeha Avanta Plus 39c - which is now fixed. With the casing off, the flow sensor led was permanently on (red light) indicating a constant demand for hot water. Pulled off the sensor, light went off. Tested this with a magnet, light back on meaning...

Hello, I've a softwood patio door and applied x2 coats wood preservative, x1 coat Sadolin Ultra base coat clear & x2 coats of Sadolin Ultra wood stain. The Sadolin Ultra is a pigmented wood "stain" but it cures more like a gloss finish. The first coat was fine, still showing the original...