I have 3 questions:
1. So is it normal for the Bell to go off for about 10 seconds when powering up the Panel although the Bell is in Hold-off mode ?
2. Also I have seen a post where someone just disabled the Bell Tamper for the Area (Wintex Area option 6) and that stopped the Bell from...
Premier Elite 48 - Aux And Zones by TheComGuy posted 18 Mar 2021 at 4:37 PM
The Premier Elite 48 Metal has 4 AUX Terminals. Can all 4 terminals be used to connect to connect various devices or is there a catch to it ?
Also Regarding Zone Terminals, Am I correct in thinking for example Zone 1...
What is the best way to "Power Up" or "Reboot"/ "Restart" an existing Texecom Premier Alarm System or Panel ?
Is there a special process like holding down a button on the panel whiles powering from the "mains" or do you just flick the power on from the "mains" ?
I'm not refering to the intial...
You are absolutely correct ! Probably not a good idea to buy PIR's from eBay. I purchase all PIR's from various security companies online so they are new.
Quite disappointing about the DT as per your post above, they are not cheap. I will go for another QD or DT but maybe from a different...
I did stumble on a post on the Texe forum where some installers were having issue with DT-W's in a Garage setting. Texe support suggested the XT-W hence my decision to go for that.
I'll see how I get on with the XT-W and then upgrade if neccessary.
Another thing I noticed about the XT-W is...
Just a quick update on this one.
It turned out to be a faulty DT-W PIR.
The PW-W I purchased to test worked perfectly in the Garage. fully aware the PW-W's are not for the Garage environment, I have now purchased an XT-W for the Garage and awaiting delivery.
Thanks so much for help and...
Does this apply for all the Compacts or just the PW-W's ? I have seen the XT-W Compacts too.
I just wanted something for testing before I jump in and buy an XT-W PIR.
Fair point ! Mesh requires more than 1 device.
I have now purchased a Texecom Ricochet Premier Compact PW-W which will be located in the kitchen, closer to DT to hopefully give it a path and closer signal.
I can PM you images of the panel, 8XP-W and DT in the garage if you don't mind.
- Yes I...
So I have done as you suggested tonight and still has not worked. The PIR's blinks only GREEN in walk test mode instead of GREEN and then RED afterwards.
I did try something last night: The PIR is able to register walk test when inside the house so whiles in walk test mode, I moved it to the...
@secureiam yes there are 4 out of 5 bars of signal when moved to the garage and 5 out of 5 when inside the house.
See screenshot. I'll redo the mesh, and tamper the device in the Garage as suggested, take off the mesh and report back.
Also is it normal not to have the "walk test", "settings"...