Recent content by thfc4ever

been looking at a salamander ct50 or rsp 50 pump as it comes with 15mm connections which is what feeds to shower are run in. can i get away with not installing an S flange ? regards colin Back to top Read more: //www.diynot.com/forums/plumbing/shower-pressure.360271/#2724263#ixzz2Pfazd4vn

been looking at a salamander ct50 or rsp 50 pump as it comes with 15mm connections which is what feeds to shower are run in. can i get away with not installing an S flange ? regards colin

thanks any recommendations

original shower was thermo mixer with hand spray head only. new one thermo mixer with diverter, 8" fixed head and hand held spray head. 1m of gravity head for hot and cold. flow to hand held has improved by changing hose to 11mm bore.

Hi i have just replaced Aqualisa shower with hand held head only (that worked fine), with a traditional rain can riser system 8" fixed head and handset performance is very poor . water only flows out of half the jets in fixed head and hand held is useless. still have another Aqualisa shower in...

Hi i have just replaced Aqualisa shower with hand held head only that worked fine, with a traditional rain can riser system 8" fixed head and hand held head. performance is very poor . water only flows out of half the jets in fixed head and hand held is useless. still have another Aqualisa...

ok thanks for your help i take full responsibility will remember not to use fairy liquid again!! thanks again for your help

Hi i changed FDD initially flame stayed low across burner for an age then fired up. on subsequent start ups the flame fires up immediately (no low flame at all) next day same situation took an age 1st time ,then immediate high flame which is contollable once oven temp reached

done all that several times

Hi i have a beko wm1540s washing machine when its time for fabric conditioner to dispense nothing happens so we have to do it manually. can you help thanks colin

Hi i have rangemaster110 seriel no 5331 022401. the right hand oven ignites but wont flame up i think its the FSD as the end looks damaged compared to left hand one. where can i get replacement. its looks easy enough to replace is there anything i should be aware of thanks