Recent content by Thomo39

Evening, I'm just after some opinions please from the pros on here that install lots of showers, I'm currently in the process of installing an en suite and am looking at a choice of shower, the 2 choices are a concealed shower or a column shower, I've attached a couple of pictures to show the 2...

Because there is a hot tub in there it will 12v fairy lights fixed to the plywood so the moisture barrier would definitely be continuous, cheers m8

morning, I have built an outbuilding to house an acrylic shelled hot tub , the roof construction is a warm roof , on the inside I planned on using a moisture treated plywood straight onto the ceiling joists, is this correct or would I need a barrier between

Evening, I need a replacement bolt for my magnaclean professional 2 , i can order from Adey but I'm just curious if this is an item that a wholesaler would stock or os there something else that can be used with the same sized thread. Cheers

hi, just a wooden deck

Afternoon. I've been getting a drip from my mira combiflow shower, I've attached some pictures of what I have removed and I'm wondering if I'm missing a washer or what is the obvious part that is faulty? The cartridge is a spare one that I have never used however I have put that in and it still...

Morning. I'm just after some advice please on the following job. I'm looking to build a glorified shed to house my hot tub in. I have created the deck which is raised off the floor slightly and I plan to use some 25mm polystyrene floor insulation to help keep the cold out from rising through the...

Pic attached

Hi I'm looking to put some composite decking down and was wondering if any installers on here can recommmed any do/donts on what type/brand to use. The decking will be going down on a timber frame (pic attached)

I'm going to run 125mm ducting and then covert to 150mm flexi for the short piece down the wall, yes i will use a decent brand

Hi, I'm installing a cooker hood in an extension at my house and it needs mechanical extraction, am i ok to run solid 100mm ducting above the ceiling clipped to the joist and then core drill outside and put a vent on? Or does it need to be a bigger sized duct? The joists are 8"x 2". Thanks

The junction is buried under the ground so there is only 2 of the 3 openings to see, can i just blank off the unused end when that pipework is removed

K

Hi, I've attached a pic of my current set up, the vertical terracotta pipe is to be cut back and a black soil pipe to be ran straight up , just wondering what happens to the t connector when I lose the old soil pipe, can it just be blanked off?

Sorry here goes