Bought house , shower fitted is electric 9.5kw Gainsborough 2000x so a few years old I thinks.
The flow from it is not that greta sadly . Having just ripped out the bathroom I see that the shower is fed from a pipe that comes down the far end of the bathroom through a boxed in section , then...
At present have a Gainsborough 2000x 9.5kw shower , supply is ok but not great , would there be any real benefit in fitting a 10.5kw,would this give more pressure? cable is about 8mtrs long and a 10mm to a 60amp rcd.
Yes I do but only tool hire shop near me does not have a soil pipe cutter so wondered if anyone had success using any other tool . Cheers for reply though.
Just removed boxed in toilet to find bowl is connected to a cast iron waste pipe which I need to cut shorter.Any ideas on how to do this >? the only tool I have suitable to hand is an angle grinder, I do not have a chain link cutter. Cheers
The hall and utility lights work off one switch and come on together when the switch is pressed. I want them to run of a 2 gang switch fed by the single live feed so that they can be switched on independantly of each other,I have run a separate cable for the hall light and tried to connect it...
Kitchen and Bathroom Sink hot taps good pressure but Bath Hot tap has to be turned on full to get water to flow but still poor, is it possibly the washer? Thanks in advance.